| Lieu d'origine: | Chine |
|---|---|
| Nom de marque: | JIAJUE |
| Quantité de commande min: | 1 |
| Prix: | Please send mail or WhatsApp |
| Détails d'emballage: | La pompe d'injection de carburant diesel 8923A954G 2644F041NG est emballée dans un emballage sta |
| Délai de livraison: | 1 jour de travail |
| Conditions de paiement: | LC, D/A, D/P, T/T, Western Union, |
| Capacité d'approvisionnement: | 1000 pièces/mois |
| Numéro de pièce: | 8923A954G | MOQ: | 1 |
|---|---|---|---|
| Mettre en évidence: | Excavator diesel fuel injection pump,Diesel fuel pump for excavators,Fuel injection pump with warranty |
||
| Product Name | Fuel Injection Pump |
|---|---|
| Part Number | 8923A954G |
| Brand Name | JIAJUE |
| Condition | Brand New |
| Availability | Rich Stock |
| Approximate Weight | 11KG |
| Size (for 1pc) | 40cm x 40cm x 40cm |
| Delivery Methods | DHL FedEx TNT UPS |
| Warranty | 3 months |
| Shipment | Dispatched within 24-48 hours |
Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains very detailed installation instructions for how to install the 387-9427 injection pump.
System Flushing is crucial! Before installing the new pump, the entire fuel system (tank, lines, and rail) must be cleaned to remove metal debris from the old failed pump.
Yes, our 319-0677 comes fully assembled with a pre-tested solenoid.
If you're not sure if this fits your machine, please send us your Engine Serial Number (ESN) for free verification.
This depends on your country and region, and the customs clearance time in your country. Please feel free to contact us and send us your address and postal code so we can check shipping costs and estimate delivery time for you.
Before removing the old pump, drain and flush the fuel tank and fuel lines. Metal shavings from a failed pump can circulate and instantly destroy your new unit.
Replace both the primary and secondary fuel filters. Ensure you use high-efficiency (2-micron) filters. Inspect the fuel transfer pump for wear; if it's weak, the high-pressure pump won't receive enough fuel.
Change the engine oil and oil filter. HEUI pumps use engine oil to create high-pressure fuel injection. Dirty or incorrect viscosity oil (e.g., using 10W-30 instead of 15W-40 in high temps) will cause immediate performance issues.
Apply clean engine oil to the O-rings and the pump drive gear. Warning: Never dry-start. Fill the pump with clean diesel through the inlet before connecting the lines.
Tighten the mounting bolts in a cross-pattern to the manufacturer's specified torque (refer to C7/C9 service manual).
| Issue | Possible Cause | Solution |
|---|---|---|
| Engine Won't Start | Air trapped in the fuel lines | Bleed the fuel system thoroughly. |
| Low Fuel Pressure | Clogged fuel filters or a leaking SCV (Suction Control Valve) | Replace filters; inspect the SCV for debris. |
| Black Smoke / Power Loss | Contaminated fuel causing plunger wear | Drain fuel tank; use high-quality diesel. |
| Loud Knocking Noise | Improper timing or loose mounting bolts | Re-calibrate the timing and check bolt torque. |